Google+ Followers

Wednesday, 31 May 2017

Scene Builder USB Sample








Good morning all how are you all doing I'm so sorry I've not been around 
commenting for a few day's as I've been sitting with my Dad
24/7 as he is really poorly.

Today's card is a sample I did for the last scan n cut USB which is 
Tattered Lace's Scene Builder.

I started off with a 8"x 8" white card and I mat and layered it
with pink and a patented paper.
I then cut out my topper out of white card on the scan n cut.
I  then coloured the flower's in pink just to make them stand out.
I added it to the centre of my card.

I then tied a large bow ut of pink satin ribbon which I added to
the bottom corner I also added some pearls and a large centre gem
to the centre of my bow..

To finish off with I added some pearls to the corner's.

That's all for today and I hope I will be back tomorrow if Dad start's 
to pick up a bit.

Hugs Debs xx

Friday, 26 May 2017

Scanncut sample three






Good morning all how are you all doing and are you coping 
with this lovely weather.
It would be lovely if I could sit in it but my time is spent
at the hospital these day's.

Anyway today's card Is the third sample from the tattered Lace
Scene Builder Scan N Cut USB.

I started off with a 8"x 8" white card and I cut my mat and layers
of silver mirri card and white glitter card.

Next I cut my hearts by using the basic shapes on the scan n cut
out of mirri and glitter card.
I added this to the centre of my card.

Next I cut the wedding scene from the USB out of mirri card and I added 
it to the right hand side of the heart. And then
I cut my sentiment out of mirri card and this is from the 
sentiments and phrases USB.
I added it to the top corner of the heart.

To Finish off with I tied a large white bow which I added
to the bottom corner and then I added a large gem to the
centre of the bow.

That's all for today and thank you for stopping by.
And a big thank you for all your well wishes for my Dad there
are really appreciated

Hugs Debs xx

Thursday, 25 May 2017

Scan n cut Scene Builder USB sample two








Morning all I hope you are all well this morning well we
thought that Dad was coming home out of hospital today but
last night he had another heart attack so it looks like he
will be staying longer.

Today's card Is a sample that I did for the Scene Builder USB
for the scanncut.

I started with a 8"x 8" white card which I added a mat of pale blue
card.
Next I cut a scalloped mat out of a paler blue card on the next layer I
cut it a fraction smaller and I cut a aperture down the left side.
I wrapped a piece of white lace around my bottom layer and then
I added my two small mats to the centre of my card.

I then cut out my sentiment out of white glitter card which
I added to the centre of my aperture.
Next I cut the humming bird out of glitter card which I added to
the side of the aperture.
I the cut some flower's and I added these to the top of the aperture.

To finish off with I tied a large blue bow which I added to the bottom corner.
I added a large gem to the centre of the bow.

That's all for today and I thank you so much of stopping by.

Hugs Debs xx



Wednesday, 24 May 2017

Pick Of the day Sample One






Good morning all how are you all doing this morning.
I would just like to thank you all for the best wishes I have receive
for my Dad he is a little better Just hope he keeps going
that way. It's been a long 8 weeks.

Today's card is the 1st sample for the Pick Of The day
Build A Scene USB for the scan n cut.

I started of with a 8"x 8" white card which I mat and layered it with 
pink card. I then cut a scalloped strip of card which I wrapped a piece of white
ribbon around it before I added it  to my card about
3ins from the bottom.

Next on the scan n cut I  cut myself a frame out of white card I
added this to my card with foam pads.
I then cut the horse and carriage from the USB out of mirri card.
I added this to my card so that it's sat on the strip of card so it
looks like the road.

I then cut out my sentiment from the sentiment and phrase's USB
and I added it across the top corner.

Then I tied a large white bow and I added it t the bottom corner.

To finish off with I added some gems and pearls around the frame.
I added a small flower to each end of my sentiment.
And a gem into the centre of my bow.

That's all for today and more samples to follow.

Hugs Debs xx

Tuesday, 23 May 2017

Bathroom wall Decoration







Good morning all hope you are all well today.
And If not I send you some crafty hugs.

Today's project is for my wet room wall I started of by buying the
hearts from B and M stores and then I painted it white.

I then joined them together with white ribbon.

With the scan n cut I cut out the roses in different sizes I made them
all up while sat at side of Dads hospital bed.
With the heat gun I added then to the hearts. The wet room is nearly
done we have just got to paint it now I'm having it all white with
Aqua accents I just cant wait to get it all finished.

That's all for today and thank you for stopping by.

Hugs Debs xxx  

Monday, 22 May 2017

Vase Of Lilly's





Good morning all how are you all doing this morning.
Sorry I've been missing for a few day's but my Dad is back in hospital
with another two more heart attack so we have been sitting with him.

Today's project is a vase of lilly's that I have been making while
I've been sat at side of Dad.

It is for my new wet room so I've used the colours of my towel's.

 cut them out on the scan n cut and the vase was even cut with it.
So I have had the nurses coming in to see how I were doing.
I coloured the petal's before I made the Lilly's up.
And I used pipe cleaner's and fine wire for the inside of them.
And then I fastened the flower's on to wooden skewers fr the stems.

I then made my vase up and I then added some Oasis into the bottom of the
vase for the stems to stick in to.
To finish the vase off I added some pearls around the edges.

That's all for today and thank you for stopping by.

Hugs Debs xx

Thursday, 18 May 2017

offset shutter card






Morning all hope you are all will this morning. wish I were
I've been up most of the night with a terrible head ache Just
cant get rid of it I think it because I am so tired.

Anyway back to today's card I'm sorry that the colours
are not showing true as the blue is a lovely powder blue.

I started of be cutting my base card in black and then I cut the lace panels
in the powder blue card.
I then cut all my mats and layers out of black and blue.

I then added all my layers to the card base.
I then added some pearls to the lace panels.
It is a really quick card once you have cut everything out.
I haven't added a sentiment yet as It's a card to go in my box
ready for when I need on.

That's all for today and thank you for stopping by and 
leaving your lovely comments. I do really appreciate them.

Hugs Debs xx

Wednesday, 17 May 2017

Black Lace and Pink






Good morning friends how are we all doing today I'm just
worn out with all this hospital visiting im doing I'm just so tired.

Today's card is a real quick card.
All I did was cut out my card base on the scan n cut.
I had to cut the lace mats about three times as it's is so fine I
kept tearing it as I were getting it off the mat.
But I did finally get them off. I just added them to my
base card.

I then cut out all the layers for the rose out of pink card.
I made up the rose and I added it to the centre of the topper.
To finish with I added a bright pink bow to the top corner.

That's all for today and thank you for stopping by.

Hugs Debs xx

Tuesday, 16 May 2017

Best Friends come in all shapes and sizes







Good morning all how are we all doing this morning.
Sorry I've been missing for a few day's but I've not been
too well I think all the running to and back from the hospital
is catching up on me.

For today's card I have used the Tattered lace Scan n cut
Shaped cards 2 USB.

I started off by cutting out my base card out of white card and
the I cut my mats out of navy card. All were cut on the scan n cut.
I added these to my card.

Next I cut out my lace panels out of white card. The piece of card that
came out of the centre of the top panel I scanned it in
and I cut it out of patterned paper which I then added to the 
centre of the panel.

Next from the Home Sweet Home USB I cut out the English Rose
file out of the same patterned paper.
I made my rose up and I added it to the centre of my top panel.

Using the Tattered lace sentiments USB I cut out my sentiment
and I added it to the bottom panel as a stopper for my Easel.

That's all for today and I thank you for stopping by.

Hugs Debs xx


Saturday, 13 May 2017

Photo Frame






Good morning all how are you all doing this morning and what
are you all up to I've got some samples to do so
I'm having a day off visiting Dad in hospital.

Today's project is a Photo Frame which I used the Scan n cut
foiling kit on it.
I started by cutting my layer's for the frame on the scan n cut.
I layered them all up using foam pads.
Next I glued my design on to the back of the frame and
them I foiled it using the Scan n cut.
I then added my frame around the image.
Next I made a stand for the back which I added using red liner tape.

To finish with I foiled a butterfly and I cut it out and I added it
to the top corner of the frame.

That's all for today and thank you for stopping by.

Hugs Debs xx

Friday, 12 May 2017

Green House









Good morning all are you all ready for the weekend where as
this week gone.
I'm in the middle of having my bathroom turned in to a wet room
so the house is like a building site.
so I've been playing on my scanncut to relax.

Today's project is a green house as it's called on the USB but
I wouldn't call it that as it's much nicer then a green house.

I used the Home Sweet Home USB for this and I was
very surprised just how quick it all came together.
I only took 30 minutes to cut it out if that and 30 minutes to
put it together I always use red liner tape as this holds it strong.

In the inside I cut and made two black garden benches which I made
and stuck down and I also made two black plant pot.
which I made a rose for each pot and I also added some trailing
plants to the pots.

I added some trailing flower's to the roof and I cut out a butterfly out
of black card and white glitter card which I layered up
and added to the flower's on the roof.

I think the next one I do I will cut the door so it open's.

That's all for today and I thank you for stopping by and leaving
your lovely comments. I do really appreciate them.

Hugs Debs xx