Google+ Followers

Monday, 21 August 2017

Hot air ballon sample 2








Good morning all how are you all doing this morning.
Have you all had a good weekend.

Today's card is another on from the craftorium POP USB.
Which was launched on create and craft last week.

It's another easel card which I cut out my base card on the Scanncut.
I then cut out my aperture so that I could hang the balloon in it.
 I cut all the back ground layers that come on the USB.

I added them all to my card I used some fine wire to hang the balloon 
In the centre of the aperture.
I then cut a stopper bar which I wrapped a piece of ribbon around it.
I them added this to my card.

I then added some peel offs around the edges and to finish
Off with I tied a bow which I added to the stopper bar.
And a flower to the centre of it.

That's all for today and I thank you all for stopping by.

Hugs Debs xxx

Sunday, 20 August 2017

Sample 1 pop Scanncut usb






Good morning all I hope you are all well this morning and I hope
You are having a good weekend.

Today's card is from the POP craftorium USB which was launched this week
On create and craft.

This is a 8"-8"easel card I made my base card on the Scanncut.
I then cut a frame from some butterfly paper I had in my stash.
Which I added to the aperture and then I cut a mat for the bottom 
Front.

Next I cut out my butterfly out of white card and then twice out
Of the butterfly paper.
I attached a piece of wire to the white butterfly top and bottom
And then I added the coloured butterflies to the front and back I then
Added the wire to the top and bottom of the aperture so that the
Butterfly can spin.

Next I scanned the butterfly paper into the scan n cut and I got it to
Cut out some of the small butterflies out.
I then added some across the bottom of my base to make a stopper

To finish off with I added some butterflies to to corners.

That's all for today and thank you for stopping by.

Hugs Debs xx

Saturday, 19 August 2017

Romance sample 4













Good morning all and are you all well this Saturday morning 
I hope you all are having a good weekend.

Today's card is the last sample from the Romance USB from
Tattered laces scan n cut USB.

For this one I started with a 9"-9" cream card which I cut a border on
The front edge.
I then wrapped a piece of cream satin ribbon around the edge of
The border.
Using cream card I cut out my topper on the scan n cut and I also cut a perfect mat for it.
I then inked around the edges.

I added this to the centre of my card and I then cut out my centrepiece
Out of cream card and I then inked around the edges.

I then tied a large cream bow which I added to the bottom corner.
I them added a cameo to the centre of my bow.

To finish off with I added some flowers to the top corner 
And some pearl swirls to the bottom.

That's all for today and thank you for stopping by.

Hugs Debs xxx

Friday, 18 August 2017

Romance sample 3









Good morning all I hope you are all well this morning and I would 
Just like to thank you all for the lovely welcome back.

Today's card is another one from the tattered lace romance USB for the Scanncut.
I started with a 8"x8" black card which I mat and layered
In black and cream.
I then cut a border from the USB out of cream card I added it
To the black mat at the side and then with my brother labeller I
Used the cream ribbon which I printed with love on it.
I wrapped it around the border. And then I tied a bow out of the same ribbon.

Next cut out my frame out of black card from the USB I then cut
 A frame for it out of cream card on the Scanncut I layered them up
And I added them to the centre of the card.
Next I cut out the dancing couple from the USB out of black card which I added to the centre of the frame.

That's all for today and I'll see you tomorrow 

Hugs Debs xx

Thursday, 17 August 2017

Romance sample 2





Good morning all well I'm back again two days on the trot lol.
How are you all today I hope you are all well it's so nice to
Have time to be blogging again.

Today's card is my second card from the tattered lace scan n cut
Romance USB plus there's a new craftorium USB out tonight
At 7pm on create and craft and it's called pop up cards.

Anyway back to today's card I started off with a 8"x8" gatefold card
Out of cream card.
I then cut out all my layers out of red and cream on the scan n cut.
I cut a extra red heart which I added to the right hand side. I then added all the heart layers
To the left hand side using foam pads.

I then tied a red bow and I added it to the bottom corner.
I then used foamarin to make my flower which I added to the centre of my bow.
The foamarin is a wonderful material if you have never seen it.
It's a thin foam which you cut out your flowers shapes with the scan n cut or by dies.
Then you use the iron to warm it up when it drops off the iron it's ready.
And then which a ball tool you shape it while it's still warm.
If you go on to Utube you can watch loads of videos on it.
It's really worth giving it a try. I tried making some poinsettias on the scan n cut
Which turned out ok and they look so feel and feel real too.




That's all for now
Hugs Debs xxx

Wednesday, 16 August 2017

Romance sample one






Good morning all friends followers and visitors 
Before I start on about today's card I would just like
To thank all the well wishes I have had for the
Loss of my Dad who sadly passed away after being ill
For a while.

I would really like to thank My friend Jennifer Bradley
As she as been there for my me while Dad was ill and then
After he passed.
Jen you are a amazing friend and thank you so much.

Anyway back to today's card it was made by using the new
USB from Tattered lace Romance from the scan n cut.

I started by making a large card I then covered it with a pretty paper
I then cut a frame on the scan n cut which I inked with pink.

Next I cut out my topper from the USB and I inked around the edge.
I added it to the centre of my card using foam pads.

Next I cut two banners on the scan n cut and I inked them and I 
added them across the centre.

I then made my flowers by using foamarin which I'm now addicted to
It's wonderful how it work as once you heat it it turn out to feel like real
Flowers.
I added them to the centre and left hand side.

To finish with I added a large pink bow which I added to the side
Of the flowers.

That's all for today and it's lovely to be back crafting and reading all
Your blogs
Once again thank you for your support.

Hugs Debs xxx

Saturday, 17 June 2017

Daisy May






Good morning all how are you all doing this morning.
It looks like we are going to have another lovely day.
Well we are only in June and today I have my first Christmas
card.

I started with a 8"x 8" white card blank which I mat and layered it
with Red and green card.
I then cut out a doily out of white card on the scan n cut.
I added this to the centre of my card using foam pads.

Next I printed off mt image from the New cd called daisy May
from Whoopsidaisy.
I then cut it out by using the scan n cut it makes it so much easier the
use the scan n cut as you get a equal border all way around the image.

I used foam pads to add her the the side of the doily.
Next I cut out the Mistletoe out from the Christmas 1 craftorium usb.
Which I added to the right side of Daisy.
I also cut out a red bow and I added this to the top of the Mistletoe.

To finish off with I added some gems to the mistletoe and the corners 
of the card.

Thats all for today and thank you for stopping by and I
hope you all have a good weekend.

Hugs Debs xxx

Thursday, 15 June 2017

House Lanternorium





Good morning all I hope you are all well this morning.
Today's project ia another sample from the
Christmas Craftorium usb which launched lastnight
on create and craft.

I have also got some free tickets to the Doncaster crafting live
show on the 15th and 16th of July so if there are any of you wanting to go
and would like two free tickets just let me know.

For this lantern I cut it out of black card and I made it up
using red liner tape.
Before I tied the top I added some battery lights.

I then cut out a poinsettia which I added to the top of the box.

That's all for today and thank you fr stopping by.

Debs xxx

Wednesday, 14 June 2017

Lamp Post





Good morning all I hope you are all well this morning.
Today see's the Launch of the new Craftorium Christmas 17 USB
on create and craft I'm sure this one will be a sell out as it as 
got some wonderful projects on it.

This is just one of the sample that I've dome and I have to say I
love it I will be doing one for my self for a table centre piece as I've
put lights in it.
The photo doesn't show how big it is It's just short of 3ft but you can
make it what ever size you like it.

If anyone would like one I'm selling them as a flat pack for you to build
for £10 including instructions and light just leave me a massage so 
I can get back to you.

Hugs Debs xxx

Tuesday, 13 June 2017

Centre stepper card







Good morning all I'm sorry I've been missing for a while but
Dad as is back in hospital after another heart attack so I've been
running about to the hospital and back so my crafting as been put on 
hold.
Today's card is one that I did a few weeks ago it is from the samples
I did for the Tattered Lace Scene Builder USB for the scanncut.

I really enjoyed doing this card as i is a bit different for me as
I usually do square cards.

Tomorrow I will post a sample that I've done for the new Craftorium
Christmas USB which is showing on create and craft on Wednesday.
And I'm sure you will love whats on this USB.

But until them

Hugs Debs xxx


Wednesday, 31 May 2017

Scene Builder USB Sample








Good morning all how are you all doing I'm so sorry I've not been around 
commenting for a few day's as I've been sitting with my Dad
24/7 as he is really poorly.

Today's card is a sample I did for the last scan n cut USB which is 
Tattered Lace's Scene Builder.

I started off with a 8"x 8" white card and I mat and layered it
with pink and a patented paper.
I then cut out my topper out of white card on the scan n cut.
I  then coloured the flower's in pink just to make them stand out.
I added it to the centre of my card.

I then tied a large bow ut of pink satin ribbon which I added to
the bottom corner I also added some pearls and a large centre gem
to the centre of my bow..

To finish off with I added some pearls to the corner's.

That's all for today and I hope I will be back tomorrow if Dad start's 
to pick up a bit.

Hugs Debs xx

Friday, 26 May 2017

Scanncut sample three






Good morning all how are you all doing and are you coping 
with this lovely weather.
It would be lovely if I could sit in it but my time is spent
at the hospital these day's.

Anyway today's card Is the third sample from the tattered Lace
Scene Builder Scan N Cut USB.

I started off with a 8"x 8" white card and I cut my mat and layers
of silver mirri card and white glitter card.

Next I cut my hearts by using the basic shapes on the scan n cut
out of mirri and glitter card.
I added this to the centre of my card.

Next I cut the wedding scene from the USB out of mirri card and I added 
it to the right hand side of the heart. And then
I cut my sentiment out of mirri card and this is from the 
sentiments and phrases USB.
I added it to the top corner of the heart.

To Finish off with I tied a large white bow which I added
to the bottom corner and then I added a large gem to the
centre of the bow.

That's all for today and thank you for stopping by.
And a big thank you for all your well wishes for my Dad there
are really appreciated

Hugs Debs xx

Thursday, 25 May 2017

Scan n cut Scene Builder USB sample two








Morning all I hope you are all well this morning well we
thought that Dad was coming home out of hospital today but
last night he had another heart attack so it looks like he
will be staying longer.

Today's card Is a sample that I did for the Scene Builder USB
for the scanncut.

I started with a 8"x 8" white card which I added a mat of pale blue
card.
Next I cut a scalloped mat out of a paler blue card on the next layer I
cut it a fraction smaller and I cut a aperture down the left side.
I wrapped a piece of white lace around my bottom layer and then
I added my two small mats to the centre of my card.

I then cut out my sentiment out of white glitter card which
I added to the centre of my aperture.
Next I cut the humming bird out of glitter card which I added to
the side of the aperture.
I the cut some flower's and I added these to the top of the aperture.

To finish off with I tied a large blue bow which I added to the bottom corner.
I added a large gem to the centre of the bow.

That's all for today and I thank you so much of stopping by.

Hugs Debs xx