Christmas shadow box

Good morning all I hope you are all well this morning.

Well I've been up for hours as George as two hospital today

One at 9am and the Rotherham at 2pm so it's going to be one boring day.

But we may get some answers to why his lungs

Were bleeding back in February.

So back to today's project it's a sample I did for the Christmas craftorium USB

It was such a easy thing to make I started by making a box and the I cut out the front

Window which I added some acetate behind it.

I then added it to the front of my box.

Next I cut out two of the inside panels on the Scanncut.

I then fixed them to the inside of the box.

I the added some lights inside the box.

And to finish of with I made a lid for the top.

That's all for today and I thank you all for stopping by.

Hugs Debs xxx

Baby crib on scan n cut

Good morning all how are you all doing today for

Today's post I made this as a sample for the craftorium play USB.

I started by cutting all my pieces out on the Scanncut.

Using white and pale blue card.

I then glued all the pieces together and then I cut out

My lace overlays out of white card. I then added them to the

Top and bottom ends of the crib.

With some fabric from my stash I made a pillow and a quilt cover.

And I also added some pom-poms across the cover.

I then made two babies out of air dry clay I know they were 

a bit small for the crib

To finish it off I cut a cross out of white card and

I added five little pom-poms on cotton to make a mobile

I then added it to the lace curtain.

That's all for today and I hope to see you back here tomorrow 

Hugs Debs xx

Treasure chestc

Good morning all have you all had a lovely bank holiday weekend.

Today is something a bit different from a card this is a sample I did from the craftorium 

Play USB 

I started by cutting out all my pieces for the outside of the box on

The Scanncut.

I then put them all together with clear dry glue.

Next I cut out the inside of the base box I then made it up and I

Glued it to the inside of the box

I then cut out the lid in pink card I made it up and the I cut out my hinge

To hold the lid on.

Using some pretty pink flowered paper I cut out all my fancy 

Overlays. I added them to the outside of my chest.

To finish of with I added cut a clasps out of gold Mirri card

Which I then added to the front of ,y chest.

I filled it with sweet if you do it in darker colours it would be great

For Halloween 

That's all for today and thank you for stopping by 

Hugs Debs xxx

Butterfly flutter by

Good morning and happy bank holiday to you all and I hope

The weather s being kind to you.

Today's card is one I did awhile ag using the tattered lace Scanncut USB

More than essentials. This USB as some wonderful

Frames and designs on it. It is definitely one to have if you

Have the Scanncut.

I started off with a 8"-8" white card which I mat and layered it with

A piece of ombré card from hunky dory.

I then cut a smaller mat which I added to the centre of my card.

I then cut out a frame out of white card on the Scanncut. I added 

It to the centre of my card.

I next cut out my butterflies out on the Scanncut out of white card.

I the coloured them in and I added them to the centre of the

Frame.

To finish off with I added some pearls to all the corners.

That's all for today and I'm looking forward to

Seeing you same place tomorrow.

Hugs Debs xxx

Daisy May

Good morning are we all having a good bank holiday

And are you having a crafting day today I'm doing samples

As well as some birthday cards I've got orders for.

For today's card I've used the whoopiedaisy cd for my topper and 

The more than essentials USB from tattered lace for the scan n cut.

I started with a 8"-8" white card which a added a mat out of pretty paper

I then cut a mat out of white card which I inked around the edges

With blue distress ink.

I added it to the centre of my card. Next I cut a smaller mat

Out of blue card which I also inked around it.

I added it to the centre of my card using foam pads.

I printed off daisy and I cut her out on the Scanncut

I added her to the centre.

Next I cut out thre swirls for flowers out of shades of blue card

On the Scanncut.

I rolled them up and I added them to the bottom corner.

I then tied a bow out of blue satin ribbon which I added to the side of my card.

I then added a gem to the centre of the bow.

And to finish off with I added some gems to the corners of my topper.

That's all for today and I hope to see you tomorrow.

Hugs Debs xxx

Happy Birthday

Morning all hope you are having a good weekend and look in forward 

To the bank holiday.

Today's card is another one I made using to tattered laces

More than essentials usb for the Scanncut.

This card is just a little larger than a A5  which I cut a white mat for it.

Then I cut two lace panels out of white card and the two

Mats out of silver Miri card.

I then matted them together and having the card as a tent fold

I added one panel down the left side and the other one 

Across the bottom.

Using the sentiment USB I cut out my sentiment out of

Pink card which I added above the bottom panel.

I then tied a white bow and I added this to the top corner.

I then added a flower to the centre of the bow.

To finish off with I added a posy of roses in between the

Two panels.

That's all for today and I hope you all have a wonderful weekend 

Hugs Debs xxx

Love you

Good morning friends followers and visitors I hope you are all well

This morning and ready for the weekend.

Today's card was made by using the More Than Essentials 

USB for the Scanncut.

I started with a A4 card which I matted a piece of pink card to the front.

I then cut out my frame on the Scanncut out of white card.

I added it to the front of my card with foam pads.

Next I used a topper from Kanbans little book of toppers. Which I 

Added to the centre of my frame.

Next I tied a large pink bow and with the hot glue I added it

To the bottom of my topper.

Next I added a string of pearls and a string of gems to the bow

And to finish the bow off I added a gem centre piece to the centre.

To finish off with I added three roses to the top corner.

That's all for today and I thank you for all the lovely comments 

You keep leaving me.

Hugs Deb xxx

On your special day

Good morning all today's card is a little different colours for me.

I started off with a white 7"-10" white card which I mat and layered it

In mint and peach card.

I then cut out my frame out of white card which I coloured with

Pencils. I then cut out a mat out of peach card and then a mint one.

I then layered them up and added them to the centre of my card.

Next I cut out my sentiment and I also coloured this in.

I added this to the centre of the frame.

Next I tied a white bow which I added to the bottom of my card.

I then added a centre piece to the centre of the bow.

To finish off with I added some gems to the flowers around the card.

That's all for today and I'll see you tomorrow.

Hugs Debs xxx

A bit of Deco

Good morning all hope you are all well this morning.

Today's card is a 7"-10" which I mat and layered in black and cream.

I then cut out my frame out of cream card on the Scanncut.

I then cut a mat for it out if black. I then added them to the front

Of my card.

Next I cut out a butterfly out of cream card which I added to the centre of my frame.

Next I cut out a border out of black on the Scanncut I just rubbed some gliding polish

To the edges this polish is magic as when it's in the jar it's pearl

Y

So I thought it would just give a shine but on black card it changes to gold

And on white it is a pearly colour.

I added the border across the bottom of the fram.

Next I cut out my flower on black card on the Scanncut and then I used the

Gliding polish to it so it looks a brassy gold colour..

Next I took a piece of black ribbon which I rubbed some polish on it 

In places so it finished black and gold.

I then tried a bow and I added it to the side of my card and then I added the

Flower to the top of the bow.

To finish off with I added a sentiment and some pearls to the top corner.

That's all for today and I'll hope to see you same place tomorrow.

Hugs Debs xxx

Box of flowers sample 3

Good morning all hope you are all well this morning.

Today's card is another sample from the Pop craftorium USB.

There's not a lot to say about this one as it was so easy to make

But I think it's great for anyone who's in hospital that can't have flowers.

I started by cutting my base out of white card and then I cut the sides which 

I then joined them together.

Next I cut out my front out of a deep pink card which I then added

To the front.

I then cut out my lace mat out of a paler pink card which I then added to the front.

Then using different patterned papers I cut all the flowers

From the file. And the leafs out of green.

I then added them into the right places on the base.

I then added some gems to the centre of each flower.

And to finish off with I cut a tiny butterfly and I added it to the front.

And it all folds flat to go in a envelope.

That's all for today and I'll see you same place tomorrow.

Hugs Debs xx

Hot air ballon sample 2

Good morning all how are you all doing this morning.

Have you all had a good weekend.

Today's card is another on from the craftorium POP USB.

Which was launched on create and craft last week.

It's another easel card which I cut out my base card on the Scanncut.

I then cut out my aperture so that I could hang the balloon in it.

 I cut all the back ground layers that come on the USB.

I added them all to my card I used some fine wire to hang the balloon 

In the centre of the aperture.

I then cut a stopper bar which I wrapped a piece of ribbon around it.

I them added this to my card.

I then added some peel offs around the edges and to finish

Off with I tied a bow which I added to the stopper bar.

And a flower to the centre of it.

That's all for today and I thank you all for stopping by.

Hugs Debs xxx

Sample 1 pop Scanncut usb

Good morning all I hope you are all well this morning and I hope

You are having a good weekend.

Today's card is from the POP craftorium USB which was launched this week

On create and craft.

This is a 8"-8"easel card I made my base card on the Scanncut.

I then cut a frame from some butterfly paper I had in my stash.

Which I added to the aperture and then I cut a mat for the bottom 

Front.

Next I cut out my butterfly out of white card and then twice out

Of the butterfly paper.

I attached a piece of wire to the white butterfly top and bottom

And then I added the coloured butterflies to the front and back I then

Added the wire to the top and bottom of the aperture so that the

Butterfly can spin.

Next I scanned the butterfly paper into the scan n cut and I got it to

Cut out some of the small butterflies out.

I then added some across the bottom of my base to make a stopper

To finish off with I added some butterflies to to corners.

That's all for today and thank you for stopping by.

Hugs Debs xx

Romance sample 4

Good morning all and are you all well this Saturday morning 

I hope you all are having a good weekend.

Today's card is the last sample from the Romance USB from

Tattered laces scan n cut USB.

For this one I started with a 9"-9" cream card which I cut a border on

The front edge.

I then wrapped a piece of cream satin ribbon around the edge of

The border.

Using cream card I cut out my topper on the scan n cut and I also cut a perfect mat for it.

I then inked around the edges.

I added this to the centre of my card and I then cut out my centrepiece

Out of cream card and I then inked around the edges.

I then tied a large cream bow which I added to the bottom corner.

I them added a cameo to the centre of my bow.

To finish off with I added some flowers to the top corner 

And some pearl swirls to the bottom.

That's all for today and thank you for stopping by.

Hugs Debs xxx