Sweet Daisy may

Good morning to you all on this Friday morning and

Are you all looking forward to the weekend.

I have to apologise for the colours of this card

As in real it is cream and a minty green but the camera makes it look dull.

I started of my matting and layering it with mint and cream card.

I then cut the round mats on the Scanncut 

Out of cream and mint card.

I added these to my card using foam pads. And then

I added my topper to the centre.

Next I made three flowers out of foamarin which I added to the 

Bottom corner.

I then tied a large cream bow and a added it to the top corner.

I added pearls and and metal butterfly to the centre of the bow.

To finish with I added some gems to the corners.

That’s all for today and I thank you for stopping by.

Hugs Debs xx

Merry Christmas

Good morning all hope you are all well this morning and having a good week 

For today’s card I have used a 8”- 8” white card 

I then mat and layered it with red card and the I cut a white mat 

That I embossed I added it to the card.

Next I cut out my topper out of red card on the Scanncut.

I added this to the card using foam pads.

I then cut out my sentiment on the Scanncut before I cut it I covered

My card with a double sided sticky sheet so that when I cut it 

It would be sticky on the top side.

I then added it to my topper and I then peeled off the backing paper 

So that I could glitter it.

I next made my poinsettias out of white and red foamarin 

Which I added to the bottom corner and one to the top corner.

That’s all for today and I thank you so much for stopping by.

Hugs Debs xx

Bambi frame

Good morning all how are you all doing today I hope you are all well.

For today I have something different from a card I have 

A set of frames that I have decorated with the Disney Bambi

Dies.

For my Niece who is having a baby girl in January 

And I thought this was a little different gift.

I started with the frame that I got from the range which was

Really cheap.

I cut out my background papers to fit in each of the frames.

I then die cut all my animals and then I arranged

And glued then onto the backgrounds.

I then put them all back into the frames.

I then added some of the animals to th frames so we

Have some of the animals behind glass and some out side.

I then tied two large bows out of pink hessian which I

Added to the top left corner and one to the bottom right hand corner.

That’s all for today and I thank you so much for stopping by.

Hugs Debs xxx

Man in the moon

Morning all hope you are all well this morning 

For today’s card I have used a 8”- 8” white card 

Which I added a pale blue mat.

I then wrapped a piece of white ribbon around the left hand side 

Of my card.

I then cut a mat out of silver Mirri card to fit the right hand side of my card.

And I then cut white mat to sit on the silver mat I

Then added them to my card.

Out of blue card I cut the man in the moon die

From Sweet Dixie Dies.

I added it to the centre of my white mat and I then added some 

Gems to the moon.

I then added strips of gems and pearls to the top and bottom 

Of the moon.

I then added some gems to the corners of my card.

And to finish with I tied a large white bow which I added to 

The centre of my bow..

That’s all for today and I thank you for stopping by.

Hugs Debs xxx

Hummingbird

Good morning all how are you all doing this morning and 

Have you had a good weekend.

For this card I started with a 7”-10” white card.

Which I mat and layered it with pink and a mint coloured card.

Next I printed my image off and I cut it our with a

Sue Wilson die.

I then cut a mat for my topper to sit on.

And I wrapped a piece of ribbon around the bottom of the mat.

I coloured my ribbon to match the topper.

I then added it to my card.

I the tied a bow with the ribbon that I coloured.

I then added a gem to the centre of the bow.

To finish off with I added some gems to the corners of my topper.

That’s all for today and I thank you for stopping by 

Hugs Debs xx

Happy Birthday Sweeta Dixie

 

Hi all how we all doing this Friday morning.

Today’s card is a bit different for me as I’ve been playing 

With inks to make my background I was really pleased 

With the way it turned out.

So I started with a 7”- 10” white card 

Which I mat and layered it with the background I’d

Just made,

I cut my frame out of white card and the sweet Dixie die.

I added this to the centre of the card.

I then cut out my sentiment and I added it to the centre of the frame 

I then stamped my flowers on the the green card with gold ink.

A I cut them out with the matching dies,

I added these to the side of my topper.

I then cut some white foliage with Sue Wilson dies

And I tuck them under the flowers.

To finish with I added some pearls to the corners.

Hugs Debs xxx

Happy ever after

Morning all hope you are all well this morning 

For today’s card I have made a wedding card for a friend.

I started with a 8”- 8” white card.

I mat and layered it with different shades of creams and beiges.

I then cut out the heart die from Tonic out of white.

And the next die down in beige card.

I added this to the left hand side of my card.

I then cut out my sentiment out on the Scanncut and I

Then added it to the  On centre of the heart.

Next I cut the mr & mrs and I added it to the right top corner.

I then stamped my flowers on to vellum with gold ink.

And then I cut them out with the matching dies.

I then added the flowers to the bottom corner of my card.

To finish with I tied a large bow out of cream ribbon 

And I added it to the bottom corner of my card.

I then added a gem to the centre of my bow to finish the card off.

Hugs Debs xxxx

Butterfly

Morning all hope you are all well this morning 

I must apologise for  the colour of these pictures 

I tried everything to get a good picture but just wouldn’t play.

For today’s card I have used some of my Tonic dies.

I started  with a 7”-10” white card.

I then added a strip of teal card across the bottom 

I then  cut a border out of white card and I added it to the 

Teal strip.

Next with the circles dies I cut them out in teal and white card

I mounted them on top of each other using foam pads.

I added this to the right of my card.

Next I cut out the butterfly trail out of teal card

And I added it to the side of my topper.

I then cut out the butterfly out of white card and I then added 

Then on to the teal butterflies.

To finish off with I tied a messy bow out of teal ribbon 

And I added it to the top corner.

That’s all for today 

Hugs Debs xxx

Fairly wingsa

Morning all hope you are all well and have a good day today

I’m hoping to have a bettter one today as it was my Dads birthday

Yesterday so kit was a sad day with Him not being.

So I tried to focus on my crafting all day and this is one of the

Cards I made.

Started by making my base card from spellbinder decorative circle dies.

And I cut each die out of shades of lilac.

I added them to my card with foam pads.

I then cut out my image with the smallest die in the set.

But. While it was in The die inked around the edges.

I then added it to my card.

Next I added some flowers down the right hand side.

I then tied a messy bow out of lilac ribbon and I added with to 

The left hand side of the topper.

To finish with I added two beaded pupils to the .bow.

That’s all for today and I thank you for stopping by 

Hugs Debs xxxx

A little whoopsidaisya

Good morning all hope you are all well and had a good weekend.

For today I have returned to my dies for a change.

I started with a 8”-8” white card that I used a

Punch along to top bottom and side.

I the use a die to make my flowers with which I added to the 

Corners.

Next I wrapped a piece of lace around the spine side 

Of the front.

I then printed off my image from a whoopsidaisy cd.

And I ten cut it out with my frame die.

I added it to the centre of my card.

To finish with I tied a purple bow which I added to the side

Of my card.

I then threaded a piece of ribbon through a bow embellishment.

To finish with I added two beaded pins to the bow.

That’s all for today and I thank you for stopping by 

Hugs Debs xxx

Rose gold collection two

Good morning all how are you all doing this morning 

And are you having a good weekend.

Today’s card is another one made with the Rose gold collection 

From  Hunkydory.

I started with a 8”-8” white card 

I them cut a mat from the card from the kit I added

It to my card I them cut a strip of card which I died down

The left hand side next I added a frame to the side of my card front.

I then added my topper on to the frame which I used

Foam pads 

And to finish off with I tied a bow out of peach ribbon

I then added it to the top right corner.

That’s all for today and I thank you for stopping by.

And I hope you have a lovely day.

Hugs Debs xxx

Peach florals

Good morning all hope you are all well this morning 

What are we all up to this weekend.

I’m going to try and do some sample.

Today’s card is made it’s a hunydory set called rose gold 

Which I really love.

First of all I cut a mat it f the backingcard from the kit.

I then added a strip of gold card down the right hand side.

I then added my topper to the centre  of the card using

Foam pads.

I then added a sentiment  topper to the top corner.

And then to finish off with I made three peach flowers

From foamarin I just love this stuff after you heat the foam

It feels  realistic.

Try and make a few flowers each day and put them in a box

So I have them ready for my next project.

That’s all for today and thank you for stopping by 

Hugs Debs xx

Baby Girl cardw

Good morning all how are you all doing today I hope you’re having a good day.

Got today’s card I have used dies as well as my Scanncut.

I started off will a 8”-8” white card.

I then cut a mat out of pink glitter card on the Scanncut.

I added this to my card.

Next I used a Tonic die which is called Victorian tapering dies.

I cut the two largest dies out of white glitter card.us

I added this to my card by using silicone gel.

Next I cut the next two dies down out of white glitter card.

I the added this to my card.

I then cut out the rock-a-by baby out of white card on the .

Scanncut from the tattered lace Scene building usb.

I then inked this with spun sugar distress Ink.

I added this to the centre of my card.

Next I cut out my butterfly sentiment out of white glitter card 

From the tattered lace sentiment usb.

Which I added to the top of my card.

I then tied a large bow out of pick sheer ribbon 

I added it to the bottom corner of my card.

I then added some pearls to the bow and to finish off

With I added a gem to the centre of my bow.

That’s all for today and I thank you for stopping.

Hugs Debs xxx

Happly Birthdaya

Good morning all I hope you are all well this morning 

What are you all up to today anything nice.

I’m off to have my nails done and then to the hospital for my bloods

Doing again.

For today’s card I thought I would get out my dies for a change

So for this card I’ve used Sue Wilson dies which I’ve had years so 

I thought I would give them a airing.

I started with a 7”-10” white card I then added a checked mat

And then with a white mat I cut out the largest die in the set

Which left it in the card. I then added it to my card.

Next I cut out the next die down in the set using checked card

And I added this to the top of the white die cut with foam pads.

Next I cut out my happy birthday and added it below 

My topper 

I then tied a large bow which I added to the bottom of my card.

And I then cut out some foliage for the top of my bow,

And to finish with I added a gem to the centre of my bow.

That’s all for today and I thank you for stopping by and leaving

Your comments I do really appreciate them.

Hugs Debs xxx

Grandfather clock part 2

Good morning all how are you all doing 

I hope you are all well.

Today I'm posting the finished photos of my grandfather clock 

I cut out all the pieces of the case out of

Gold Mirri card and white card.

I put I together using red liner tape as I find it is the only

Thing that holds it strong.

I then cut out the pendulum out of gold Mirri card

And white card for the end of the pendulum. I added it to my case.

Next I cut the base out which is the same base as the 

Clock.

Next I glued the clock on to the case and then on to

The base.

I have left the back of the clock open so that I can add

A battery clock mechanism to it when it arrives.

I'm then going to decorate it for Christmas.

That's all for now and I hope to see you tomorrow 

Hugs Debs xx

Grandfather clock part 1

Good morning all how are you all doing this morning 

And have you had a lovely weekend 

Today's project is part one of my grandfather clock which

I'm making using the craftorium fireworks USB.

I will have part two tomorrow as I've still got the case and base to make.

I started by cutting out the clock out of gold Mirri card

And I up it all together with red liner tape.

I then cut out all the lace mats out of whit card

Which I added to the base ofte clock.

When it's finished it will be about 3-4 ft tall

That's all for today and I hope yo all have a lovely day.

Hugs Debs xx