Heart full of love

Good morning all I hope you are all well this morning 

Today’s card is the last one of my samples 

For the Tattered lace usb LACE.

I started with a 8”x 8” lilac card which I added a mat of

Decorative paper.

I cut out the heart in lilac and Mirri card which I

Layered up in the enter of my card.

Next I added my sentiment to the bottom corner.

Next I added some flowers to the top right corner.

And to finish off with I tied a large bow out of lilac ribbon 

Which I added to the bottom corner 

And I added a decorative embellishment to the centre 

Of the bow.

That’s all for today and thank you for stopping by 

I do really appreciate it.

Hugs Debs xxx

Lacey Daisy

Good morning all I hope you are all well this morning 

And if not I send you some crafty hugs.

For today’s card I have used the tattered lace LACE usb

And a whoopsidaisy image.

The card is a 7”x10” which I made out of a A3 piece of card.

I covered it with a piece of paper from

My stash.

Next I cut out two large corners out of white card

From the usb. I find the using a sheet of micro dots

Is the easiest way got stick them down.

I the printed of my image and cut it out on the Scanncut 

I added this to the centre of my card.

To finish off with I tied a large bow and I added it 

To the bottom corner.

That’s all for today and thank you for stopping by 

I do really appreciate it.

Hugs Debs xx

Lacey Butterfly

Good morning all I hope you are all well this morning 

It looks like we could be in for a lovely day as the sun is 

Out this morning.

Today’s card is a really quick on I have used the 

Tattered lace LACE usb for this one.

I started with a 7”x 7” white card which I added a pink mat.

Next I cut out a doily design out of white card.

I used micro dots to add it to my card as it’s so fine.

Next I cut out my butterfly out of white card

It is so Lacey.

I added this to the centre of my card.

And to finish off with I added some gems to the body

Of the butterfly and the corners of the card.

That’s all for today and thank you for 

Stopping by 

Hugs Debs xx

Lacey Daisy

Good morning all I hope you are all well this morning 

What are you all up to today anything nice.

I’m hoping to get some crafting done as I’ve not 

Been too well for the last few days.

Anyway today’s card is another lace sample but I have

Used a whoopsidaisy image with it.

I started with a 8” x 8” pink card which I cut the lace edge 

On the Scanncut 

I added decorative papers to the inside and out.

I printed off my image and cut it out on the Scanncut.

I added this to the centre of the card.

To finish with I tied a large bow which I added 

To the bottom of my topper.

That’s all for today and thank you for stopping by 

Hugs Debs xxx

Lace sample

Good morning all I hope you are all well this morning 

And I hope you haven’t got too much snow ours is now

Staring to move.

I’m sorry I’ve not been around commenting but we’ve had

Trouble with the WiFi. But hoping it’s sorted now.

Todays card is a same I made for the tattered lace LACE usb

That launched last Thursday.

I started with a 10”x 7” white card 

I added a mat of pink and white decorative paper.

I them cut out my designs out of pink and white.

I cut the outer one in pink which I added to my cad.

Next I cut the next one don in white which I mounted

On to silver Mirri card.

I then added it to the centre of my card.

I then it the centre piece out of pink card which I added

To the centre of the card.

To finish off with I tied a large pink bow that I added to to

Bottom of my card.

That’s all for today and that you for stoping by

Hugs Debs xx

Tattered lace sample

Good morning all I hope you are all well this morning 

Today’s card is another one of my samples from the 

New tattered lace Lace usb.

I started with a 8”x 8” pink card which I added a black mat.

I then cut a pink mat and I embossed this one.

Before I addeared it to my card I wrapped a piece of

Black velvet ribbon around the centre.

I then cut out all my dies in black and pink.

I then layered the up by using foam pads which I

Added to the centre of my card.

I then cut out a sentiment out of black card and 

I added it to the top corner.

I then tied a large bow out of velvet ribbon which

I added to the bottom corner.

I then added a large crystal button to the centre 

Of the bow.

To finish off with I added some gems to the corners.

That’s all for now 

Hugs Debs xx

Cherry blossom

Good morning all I hope you are all well this morning 

And ready for the weekend I just don’t know where this week as gone

For this card I made a 7” easel card on the Scanncut 

I cut two pink mats and two of the matching papers on the

Scanncut.

I added them to both top and bottom parts of the easel.

Next I tied a large bow which I added as a stopper 

On the base of the card.

Next I cut out the tattered laces floating in the air frame die.

Which I added to the top part.

Next I printed off my cherry blossom charisma image

And I cut it out with the matching die.

I added them around the right side of the frame.

I then cut them out again and decoupaged them

To insist off the card I cut out my sentiment out of gold

Mirri card which I added to the centre of the frame.

And I added some gems to the centre of each flower on the frame.

That’s all for today and thank you for stopping by.

Hugs Debs xx

Summer Harvest

Good morning all I hope you are all well this morning 

What are you all up to today anything nice 

I’m going to have to get down and get some samples done.

For today’s card I have used a Tattered Lace summer Harvest die

And the Charisma download and matching backing papers.

I started by matting and layering my 8” x 8” card.

And I wrapped a ribbon around the mats before addearing it

To the card base.

Next I cut out a mat using a ruffled velvet die which I inked around

The edges.

I added this to my card using foam pads.

Next I printed of my images and I cut them out with the matching dies.

I then added my topper to the centre of the card..

I added part of the die cut to the top corner.

I then cut out my sentiment out of matching card which

I added to the centre of my frame.

I then tied a large bow out f organza ribbon and I added 

this to the bottom corner.

And to finish this card off I added three flowers to 

the bottom corner.

That’s all for today and thank you for stopping by.

Hugs Debs xxx

Pink blossom

Good morning all I hope you are all and had a good weekend 

And Mother’s Day.

Today’s card is one that my mum used to love and if

She would have been here with me this is what I would have

Made her for Mothers Day.

I started with a 8”- 8” white card.

I used the charisma die and image. I cut a smaller mat out

Of matching to paper and then a cm smaller white mat.

I then cut a small rectangle piece of matching paper.

And a cm smaller white mat which I added to the centre of

My card.

Next I printed off my flowers and then I cut them out with 

The matching die.

I then trailed them across my card.

I then cut my sentiment with a sue Wilson die

And I added this to the top of the card.

I then tied a large bow out of pink satin ribbon

I then added it to the bottom corner.

I added a gem bow to the centre f the bow.

To fish off with I added some pearls to the corners of 

my card and mats.

That’s all for today and thank you for stopping by 

And leaving your wonderful comments 

I do really appreciate them.

Hugs Debs xx

Lace usb sample

Good morning all I hope you are all well this morning 

What are you all up to today anything nice.

Today is the launch of the new tattered laces usb for the Scanncut 

And it is called Lace.and it will be on createandcraft 

At 7pm tonight 

I think this is one of the best usbs upto now it lives upto

It’s names as it is all laces dies..

For this card I started by making a 8”x 8” white card I then added my card to my

Scanncut mat and I cut the lace panel into my card.

Next I added a strip of lilac card down the side of my card.

And then a patterned paper. I also used a whoopsidaisy image

Which I added to the side of my card.

I then tied a large lilac bow which I added to the top of

My topper.

To finish the card off I lined the inside of my card with lilac papers.

That’s all for today and thank you for stopping by 

Hugs Debs xx

Black and white lacea

  

Good morning all I hope you are all well this morning 

On this Wednesday where is the weeks going.

Today’s card is a sneak peek of the new

Tattered laces Scanncut usb which is called Lace.

And I hav to say this is my favourite usb so far.

This card is a touch bigger than a 8” card.

I started by cutting two lace panels into a piece of

Black card.

I added this to my card next I cut out the

Signature mat out of Black card and white card.

I added the black one across the card and the white 

One down the card.

I cut the next layer of the signature die out of black cad

I only use the outer frame of leafs.

Which I added to the centre of my white mate.

Next I cut the smallest file from the signature set out of black

Card which I added to the centre of m card.

I then cut a butterfly out of white card and I added it to

The top corner.

To finish off with I tied a large white bow 

And I added to the bottom corner 

I then added a love embellishment to the centre of the bow.

That’s all for today and thank you for stopping by.

Hugs Debs xx

Hearts and butterflies

Good morning all I hope you are all well this morning 

What are you all up doing today anything nice.

I’m hoping to do some crafting as I donated all y cards to

The Barnsley hospice charity market stall

And I am so proud that all my cards were sold.

DFor today’s card I started with a 8” x 8” white card.

I then foldered the front back on itself.

I then cut a 21/2 inc deep piece of card which I added

To the front of my card at the bottom.

I have used a tattered lace charisma image and die.

I added a strip of matching card down the front of the card.

And then a white strip on to that.

Next I did the same to the piece of card that I added

To the bottom of my card.

I then cut the pearl trim heart on the Scanncut.

I then added it to the centre of my card.

Next I printed off my flowers and cut them out with 

The matching die.

I then added then around the heart.

I then trialed one spray of flowers down the right hand side 

Of the back panel of my card.

I then cut out my sentiment out of the matching paper 

And I added it to the front at the bottom.

I then tied a large bow which I added to the bottom 

Corner.

That’s all for today and thank you for 

Stopping by 

Hugs Debs xx